Home How To Fixed Windows Update Errors 0x80245006, 0x80190001 And 0x80073712

Fixed Windows Update Errors 0x80245006, 0x80190001 And 0x80073712

0
Update Windows Error

Are you having trouble updating Windows 10 or installing the latest Update on Windows 10? Then this post may assist you in installing the Windows 10 update and resolving numerous Windows update errors such as 0x80245006, 0x80190001, and 0x80073712. Updating Windows 10 is critical because it makes the Windows operating system more reliable and secure. However, most of the time, installing updates takes longer, becomes stalled, or even becomes stuck during the update process. If you cannot download the Windows 10 update, follow the solutions listed below in order. This article covered the most frequent Windows 10 update errors 0x80245006/0x80190001/0x80073712. Some upgrade files are damaged, corrupt, or missing, according to error codes 0x80190001, 0x80073712, or 0x80245006. In addition, the driver problem might potentially create Update Windows Errors in Windows 10.

Fixed Windows Update Errors – 0x80190001, 0x80073712, 0x80245006?

Try the solutions provided below, regardless of whether you are experiencing any of the mentioned errors. The solutions are ideal and will help you avoid the Error and install the Windows 10 update without Errors.

Run Windows Update Troubleshooter

The Windows update troubleshooter is intended to fix different Windows update errors and issues. Thus, you should run the update troubleshooter to fix Windows 10 update error 0x80245006. To run it, follow these steps:

1 – Press Windows + I to open the Settings app.

2 – Select Update & Security.

3 – Select Troubleshoot from the menu, and then in the right pane > Windows Update > click Run the troubleshooter.

4 – Finally, follow the onscreen instructions to finish the process.

After that, try installing Windows 10 update to see whether the error codes 0x80190001, 0x80073712, or 0x80245006 have been resolved.

Repair Corrupted System Files

Another typical cause of Windows Update Errors 0x80190001 is system file corruption or damage. So, run the SFC scan to repair the system files. To run it, follow these instructions:

1 – Press the Win+X key, then select Command Prompt (Admin).

2 – Run sfc/scannow as soon as the Command Prompt appears.

3 – Wait for the SFC scan to finish the entire scanning process (approx. 15 minutes).

When the scanning process is finished, check whether the Windows 10 error 0x80073712 or 0x80245006 has been fixed.

Run DISM Command

If the SFC scan does not work, try the DISM command. You may repair corrupted Windows 10 system files and avoid update errors in Windows 10 by using the Deployment Image Service and Management (DISM) command.

1 – To begin, open the command prompt administrator (as suggested above) and type the following command:

Dism /Online /Cleanup-Image /RestoreHealth and click Enter

After the complete process, restart your computer to see whether the Windows 10 May 2019 update errors have been resolved.

Clean Up Temp & Junk Files

Storage Sense is a function in Windows 10 that either automatically or manually cleans temp files from a computer or laptop. Running it manually will scan the storage and return a list of files you may delete as you see fit. To clean Windows 10 downloaded temporary files, follow these steps:

1 – Go to Settings.

2 – Then click System> Storage.

3 – Under the “Storage sense” area, click the “Free up space now” option.

4 – Remove the default selections.

5 – Check the option Verify Temporary Windows Installation Files or Windows Setup Temporary Files.

6 – Finally, click the Remove files button.

After that, click the Check for updates button to proceed with the upgrading to the May 2019 update. If this answers the Windows 10 update error 0x80190001, great; if not, follow the next solution.

Check Date & Time Are Correct

Many users claimed that Windows 10 update errors 0x80190001, 0x80073712, or 0x80245006 arise from the PC’s inaccurate time and date. If you’re experiencing the same problem, don’t panic; all you need to do is correct the date and time on your computer. So, to correct the date and time on your PC, follow the steps below:

1 – First, right-click on the clock in the right bottom corner. Well, a menu bar will appear, and you must select Adjust date/time.

2 – Uncheck the Set time automatically box on the right side.

3 – Under the Set, the date and time manually section, click the Change button.

4 – Now, update the date and time and click the Change button to save your changes.

5 – Restart your computer after setting the time.

After your system restarts, update Windows 10 and see whether the update error 0x80190001 persists.

Disconnect All The External Peripherals

Complicated bugs can sometimes be fixed using simple techniques. First, disconnect any external accessories (printer, USB drives, external hard disk, etc.) from your PC to fix numerous update error codes while installing the Windows 10 May 2019 update. However, bear in mind that you do not need to disconnect your keyboard and mouse from your PC while removing all external connections. After disconnecting any external connections, try installing the Update to see whether this solution works for you.

Disable Internet Connection

Many users who get update errors 0x80190001, 0x80073712, or 0x80245006 in Windows 10 indicate that disabling the internet connection before installing the Update fixes the problem. However, be sure to download your Update. As a result, you can optionally disable the Internet connection during installation. Although it is not the ideal solution, many users fix Windows 10 update error 0x80190001 by simply disconnecting from the Internet.

Update Drivers

In certain circumstances, obsolete or incompatible drivers also cause Windows Update Errors. Well, check for outdated drivers and update them to fix Windows 10 May 2019 update error 0x80190001, 0x80073712, or 0x80245006. To install the most recent driver updates, go to the manufacturer’s website or the Microsoft official website and look for the most recent updates compatible with your device, then install them. Regardless, you may simplify the process using the automated Driver Easy, which checks and automatically updates the drivers and resolves issues linked to outdated drivers in Windows PC/laptop.

Disable Windows Firewall and Antivirus Program

The antivirus program should be turned off since it protects the System against virus/malware infestation. However, in rare circumstances, the antivirus program installed may interfere. So, it is recommended to temporarily disable them and then reactivate them after fully installing the Windows 10 May 2019 update. To disable it, follow the steps below.

1 – Go to the system tray in the bottom right corner > right-click on the antivirus program icon > disable it.

2 – Now, press Windows+ R, type control panel, and then click on System and security.

3 – Select Windows Firewall.

4 – On the left side, click Turn Windows Firewall on.

5 – After that, disable the Windows Firewall and restart your computer.

I hope this helps you to resolve Windows update errors 0x80190001 as well as errors 0x80073712 and 0x80245006.

Exclude Pending.xml File

One of the most common causes of Windows Update error codes 0x80190001, 0x80073712, or 0x80245006 is a stuck or pending.xml file. So, boot your computer into Safe Mode to remove the pending.xml file, then boot your computer normally and try installing the pending Windows 10 update.

Perform Disk Cleanup

Disk cleaning can be used to fix Windows Update error codes 0x80190001, 0x80073712, or 0x80245006. The accumulation of browser cache and temporary files on the hard drive is detrimental to the PC. So, you may use the Disk Cleanup tool to remove all of Windows’ setup files and fix Windows Update errors. The following are the steps to execute Disk cleanup:

1 – Click Windows Start button. 

2 – Next, type cleanmgr. 

3 – Select Disk Cleanup from the list.

4 – A little Disk Cleanup window will pop-up> Select (C:) drive or the drive you wish to clean > click OK.

5 – Next, click the Clean up system files button.

6 – Select the drive once more (c:).

7 – Check all the boxes except the Download box.

8 – Finally, click the Ok button.

9 – The files will be downloaded by the Disk Cleanup Tool.

10 – Finally, restart your computer.

After you have completed all of the steps, go to the Settings option > Now click on Update & security > Then click on Windows Update. Finally, click Check for updates to verify whether the Windows Update errors have been resolved.

Remove Incompatible Apps

It has been discovered that some incompatible apps prevent you from installing the Update or cause the Update to become stuck during installation. To fix Error Codes 0x80073712, 0x80190001, and 0x80245006 on Windows 10, you must delete several apps that may be corrupt or harm your PC’s installation.

After deleting the problematic app from your PC, you should be able to install your Update without issue. However, while manually removing the program, some undesired trash files may lead to an error. As a result, you can use a third-party uninstaller to remove the app or file from your PC entirely.

Delete The Software Distribution Folder

Many users were able to fix the Windows Update Errors due to this. So, it’s worth a shot to delete the Software Distribution folder in Windows 10. Then, follow the steps outlined below:

1 – Open Command Prompt (Admin) by pressing Win + X. 

2 – Type the commands and press Enter after each one.

net stop wuauserv

net stop bits

This now disables the Windows Update Service and the BITS (Background Intelligent Transfer Service).

3 – Next, navigate to the C:WindowsSoftwareDistribution folder and delete all files and folders.

However, if any of the files are in use, you will be unable to delete part of the files >restart your device. After resuming, repeat the preceding commands.

And you will be able to delete the files and then reboot your System or type the following commands in CMD > at a time > click Enter after each to restart the Windows Update associated Services.

net start wuauserv

net start bits

The folder has now been deleted, and the error 0x80190001, 0x80073712, or 0x80245006 in Windows 10 has been fixed.

Download Update Manually

The last solution is manually installing the Update to fix the May 2022 install errors. To manually install the Update, follow these steps:

1 – Open Microsoft Update Catalog. 

2 – Enter the KB update code in the error notice in the website search box.

3 – Click the Search button > to view the search results.

4 – Select the option to download the Update.

Note: If you are unsure which Update to download, put ‘system’ into Cortana’s search box and click to open a pop-up containing the needed Windows 10 version and system type information.

1 – After downloading the Update> save it to the location you specify on your System.

2 – Open the patch you downloaded and install it.

And the Windows 10 May 2019 update has now been installed without Error.

Restore, Reset Or Reinstall Your PC To Fix Windows Update Errors

Well, if none of the above solutions work, you can restore, reset, or reinstall your PC to resolve the following Windows 10 May 2022 update errors: 0x80190001, 0x80073712, 0x80245006.

Perform System Restores 

System restores fix the restore points that system protection creates. It will restore your computer to its previous System restore point. System restore will not impact your files but remove all apps, drivers, and updates.

Reset PC 

In this method, you will restore Windows to its factory settings. You will be given the option of removing everything or removing certain apps and their settings. If you select remove apps, your files will stay unchanged after the reset, but all apps will be removed from your app.

Reinstallation 

This solution will reinstall a fresh copy of Windows on your System. First, you must launch WinRE to perform a system restore. Then, follow the steps outlined below:

1 – To begin, press the Start button.

2 – Select Settings.

3 – A pop-up window will open; scroll down to select Update & Security.

4 – Next, click the Recovery tab.

5 – Click the Restart Now button.

6 – After completing the reinstallation, you will enter WinRE.

As a type, you may apply these three solutions to fix any Windows PC bug. The three solutions will also quickly fix Windows Update Errors 0x80190001, 0x80073712, and 0x80245006.

Final Words:

This concludes our discussion of how to fix the Windows Update Errors 0x80190001, 0x80073712, or 0x80245006 on Windows 10. Try the solutions provided individually to see which works best for you in resolving the errors and installing the Windows 10 May 2019 update without any problems. Well, the supplied workarounds work for you to fix various update error codes while installing the latest Windows 10 update, so try the solutions in that situation as well.

Exit mobile version